- Case Hardened .050″+ deep & Stabilized, 58-62 Rc
- Inch or metric sizes
- Sharp ID corners Quote on request
- Class XXX Quote on request
- Chrome plating Quote on request
- Master – bilateral (split) tolerance
- Go – unilateral (one way) minus tolerance
- Nogo – unilateral (one way) plus tolerance
- Ring gages are manufactured in accordance with ANSI specification B89.1.6.-1984
- Roundness and taper of all gages will not exceed 50% of the applicable gagemaker’s tolerance and are non-accumulative
- Certificate Calibration Info & Pricing
Flange Steel Rings
Features:
| Range Above | Thru | Blank | Class |
Tolerance
In Inches |
1 | 3+ |
|---|---|---|---|---|---|---|
| 1.510" | 2.010" | Blank #6 | XX | .000040 | $338.00 | $316.00 |
| (38.35mm | 51.05mm) | 4" O.D. | X | .000080 | 278.00 | 260.00 |
| 1-1/2" Long | Y | .000120 | 252.00 | 236.00 | ||
| Z | .000160 | 228.00 | 214.00 | |||
| 2.010" | 2.510" | Blank #7 | XX | .000040 | $379.00 | $354.00 |
| (51.05mm | 63.75mm) | 4-1/2" O.D. | X | .000080 | 316.00 | 296.00 |
| 1-1/2" Long | Y | .000120 | 287.00 | 268.00 | ||
| Z | .000160 | 259.00 | 243.00 | |||
| 2.510" | 3.010" | Blank #8 | XX | .000050 | $424.00 | $396.00 |
| (63.75mm | 76.45mm) | 5" O.D. | X | .000100 | 354.00 | 331.00 |
| 1-1/2" Long | Y | .000150 | 323.00 | 302.00 | ||
| Z | .000200 | 294.00 | 275.00 | |||
| 3.010" | 3.510" | Blank #9 | XX | .000050 | $476.00 | $444.00 |
| (76.45mm | 89.15mm) | 5-1/2" O.D. | X | .000100 | 406.00 | 379.00 |
| 1-1/2" Long | Y | .000150 | 370.00 | 346.00 | ||
| Z | .000200 | 336.00 | 314.00 | |||
| 3.510" | 4.010" | Blank #10 | XX | .000050 | $529.00 | $493.00 |
| (89.15mm | 101.85mm) | 6-3/8" O.D. | X | .000100 | 459.00 | 428.00 |
| 1-1/2" Long | Y | .000150 | 418.00 | 390.00 | ||
| Z | .000200 | 379.00 | 354.00 | |||
| 4.010" | 4.760" | Blank #11 | XX | .000065 | Request Quote | |
| (101.85mm | 120.90mm) | 7-1/4" O.D. | X | .000130 | Request Quote | |
| 1-1/2" Long | Y | .000190 | Request Quote | |||
| Z | .000250 | Request Quote | ||||
| 4.760" | 5.510" | Blank #12 | XX | .000065 | Request Quote | |
| (120.90mm | 139.95mm) | 8-1/4" O.D. | X | .000130 | Request Quote | |
| 1-1/2" Long | Y | .000190 | Request Quote | |||
| Z | .000250 | Request Quote |